[How to Guide] Update Moto Z2 Play Android Oreo Firmware [OPS27.76-12-25]


Android Oreo update has rolled out for Moto Z2 Play. Check it out The OTA notification, if you got the notification then follow and update your device. Otherwise, you didn’t receive yet the OTA notification then we share today how to update Moto Z2 Play Android Oreo. So if you are the user of Moto Z2 Play and can’t wait for the OTA update then follow below article and update Moto Z2 Play Android Oreo.[How to Guide] Update Moto Z2 Play Android Oreo Firmware [OPS27.76-12-25]

Appreciations for XDA members raphamfc for the OTA ZIP, and HTCDevil and Junior Passos for providing the link. The updating process we share the manual method to install Android Oreo on Moto Z2 Play. And file size large, so for downloading the updating file use the Wi-Fi connection to easily download and also got the suitable USB data cable for performing the updating process on your device. Download Android Oreo OTA updates file from below and proceed the process.


  • Below guideline only for Moto Z2 Play. So don’t try given steps for any other variants.
  • Correctly follow step by step guide and don’t miss any step during the process. Otherwise, we are not liable for any loss or damage to your device. Proceed at their own risk.
  • Properly charge your device battery before the process, if your device turns off during the process. It may damage or brick your device.
  • Backup your important data and save to correct place, it’s not important but keep take for safer side.
  • Enable USB debugging from Setting> Developer option>and enable USB debugging. If your device developer option is not enabled, then go to Setting> About Phone and tap on the build number 7 times then your device developer option will be enabled.


How to Update Moto Z2 Play Android Oreo

Method 1:

1: First, download and install ADB and Fastboot drivers for the window. And then enable USB debugging, that we describe in above section.

2: Now download the Android Oreo OTA zip from the above link.

3: And then Copy the zip file to the folder where ADB installed.

4: After that Switch OFF your Moto Z2 Play properly, and boot into recovery mode. For to do press and hold the Volume Down button for a 2 or 3 seconds and then press the power button and released it. Use the Volume Up & Volume Down key for selecting the option.

5: In recovery menu choose Apply update from ADB, and connect your phone to computer.

6: Now open command prompt window, and simply press and hold the Shift key and right-click in the ADB folder in empty space and select the open command window here option.

7: And now check your connection by typing the below command and press enter key.

adb devices
  • If your device is listed, then you’re ready to flash the ROM.

8: Now Flash the Android Oreo OTA Zip on your Moto Z2 Play by typing below command.

adb sideload File Name.zip

9: Wait for completing the process and once the process complete then Reboot your device.

That’s it!

Method 2:

1: Download Android Oreo OTA zip file for Moto Z2 Play from the download section.

2: And then copy the downloaded file and paste on your device internal storage (SD Card).

3: Now Turn Off your phone and boot into recovery mode. For to do so simply press and hold the Volume Up + Volume Down + Power button at the same time for a while.

4: Once your device boot into Recovery mode then select option apply update from sd card.

5: Now select the OTA zip file that you downloaded in the download section above. And start the flashing process.

6: Wait for updating process, and once the process complete. Then Reboot your device

Factory Image installation on Moto Z2 Play (Method)

1: First, download and install ADB and Fastboot drivers for the window. And then enable USB debugging, that we describe in above section.

2: And then download the correct firmware for Moto Z2 Play device from above and extract it to the ADB installation directory.

3: After that go to adb and fastboot installation directory and open the command window, Simply press and hold the ‘shift’ key and right-click anyplace in that folder.

4: And then reboot your phone into Bootloader mode by turn off your device. And then press and hold ‘Power + Volume Down’ at the same time.

5: Now write down the below commands one by one.

6: If you are using mfastboot then type ‘mfastboot’ in its place of ‘fastboot’)

fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear

7: Done! The Above phases will flash the Stock Android Oreo Firmware on Moto Z2 Play.

That’s it! Now you have update Moto Z2 Play Android Oreo. So this is the easy and simple method to install the OTA zip on your device if you have any problem. Then leave the comment below and don’t forget your feedback.



Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.